B.I.C COPPER TINNING SOLDER FLUX

 B.I.C TINNING SOLDER FLUX

WATER SOLUBLE SOLDER FLUX

FEATURES

• Non Spattering formula
• High Activity and Excellent Wetting
• VOC - Free
• Compatible with Most Base Metals

DESCRIPTION

Solder Flux is a water-based, high activity liquid flux designed to offer low - spattering and excellent wetting, even to difficult to solder parts.

It is formulated for a variety of electronic, electrical and industrial applications, including wire, cable, and terminal lead tinning and soldering, flat and round wire fabrication, and semiconductor and component lead tinning. 

Tinning flux will solder:- copper, beryllium-copper, nickel, alloy 42, alloy 51, nickel, brass, some steels, and base metals.

The broad activity range of Solder Flux makes it an excellent choice for tin/lead, tin/silver, tin/bismuth, indium, and other solder alloy.

APPLICATION

• Tinning Solder Flux can be used in dipping, spraying, brushing, swabbing, and many other fluxing operations. For spraying, Solder Flux is ready to use directly from its container, no thinning required. When spray fluxing, it is imperative that proper flux coverage and uniformity be achieved and maintained. A dry flux coating of 500 to 1500 micrograms per square inch is recommended as a starting point.
•  When nitrogen sealed wave solder equipment is used, it is generally necessary to apply slightly more flux than normal as a result of excess drying due to the extended length of the equipment.

CLEANING PROCEDURE

The residues and raw flux are completely water soluble and should be washed in an aqueous cleaning system using deionized or distilled water heated to a recommended temperature of at least 60°C (140°F)

PRECAUTIONS

• Solder Flux  has an unopened shelf life of 1 year when stored at room temperature. 
•   Do not freeze this product.
•  Solder Flux is ready-to-use, water can be mixed two/three part as necessary.
•  Do not mix used and unused chemical in the same container. 
•  Reseal any opened containers.

SAFETY MEASURES

• Use with adequate ventilation and proper personal protective equipment.
•  Refer to the accompanying Material Safety Data Sheet for any specific emergency information.
•  Do not dispose of any hazardous materials in non-approved containers.

PHYSICAL PROPERTIES

CORROSION TESTING

Non- Corrosive Halide Free Formula

SURFACE INSULATION RESISTANCE

Contact us for Purchase.

Best Regards,

B.I.C Solder Team

BAJAJ INSULATION CO. MANUFACTURERS SOLDER WIRE, SOLDER STICKS, SOLDER FLUXES, PCB CLEANING SOLVENTS, DIP SOLDERING MACHINES, TIN-COPPER WIRE, TIN-ZINC WIRE AND ALLIED CHEMICALS IN DELHI.